#USB RFID READER SOFTWARE INSTALL#
#USB RFID READER SOFTWARE SERIAL#
#USB RFID READER SOFTWARE MANUAL#
#USB RFID READER SOFTWARE SOFTWARE#

We recommend setting this parameter less than the tag detection interval.Įnable antenna only when reading tags - If this option is turned on, the reader will be enabling the antenna only when the tags are being read. The more the time interval, the less the traffic.ĭetect tags during N seconds - This parameter defines the time during which the reader will be polling the tags. This parameter directly affects the amount of data transferred between the reader and the computer. If this parameter is set to zero, the reader will be continuously checking for any tags in its field of view. Start tag detection every N seconds - If this parameter is not set to zero, the reader will be checking for any tags in its field of view (FOV) at the specified time interval. If this option is turned off, the application will not do the conversion but will export the time as received from the reader. These parameters will be sent to the reader when a connection is established.Ĭonvert time from UTC to local time zone - If this option is turned on, the application installed at the computer will convert the UTC time (sent by the reader according to the LLRP protocol) into the computer's local time. Use the 'Reader operation mode' parameter group to define how the reader should read RFID tags. The module configuration window will open (Figure 5).įigure 5: Configuring the module Reader operation mode To additionally configure the module, click the 'Configure' button next to the selected module. Select the module from the two drop-down lists, as shown in Figure 4. When a TCP connection is established, the module will configure the reader's operation mode, and then will receive and process the incoming data. The purpose of the LLRP Reader Protocol parser module is to facilitate interaction with the reader. To ensure that connection with the readers is stable, you can configure the selected options, as shown in Figure 3.įigure 3: Additional TCP connection settings Configuring the data parser Information: One server can simultaneously handle multiple readers.įigure 2: Configuring the TCP server mode

In the TCP logger's settings, enter only one address and one port (see Figure 2). The TCP server will be waiting for readers to connect. In this case, enter the server's IP address in each reader's settings.

#USB RFID READER SOFTWARE MANUAL#

If the reader is configured as a TCP client (see the user manual for the reader), you should configure the logger as a TCP server. To configure the logger as a TCP client, specify the IP addresses of the RFID readers, as shown in Figure 1.įigure 1: Configuring the TCP client mode To ensure that the logger can do its job, add it to your firewall's exception list. Note: Your firewall may block the logger's network activity. Note: Do not confuse the terms 'client' (as referred to the LLRP protocol) and 'TCP client.' In this case, the computer (client) initiates a connection to the reader and acts as a TCP client.

Information: According to the LLRP protocol specification, TCP port number 5084 is used for data transfer.Īn RFID reader usually acts as a TCP server.

#USB RFID READER SOFTWARE INSTALL#

Download and install the RFID Protocols plugin.Ĭonfiguring the connection with the reader.Download and install the Advanced TCP/IP Data Logger software.Or other readers that support LLRP protocol.

#USB RFID READER SOFTWARE SOFTWARE#

Using the commonly used terminology, we can call this software solution as 'RFID Middleware.' Compatible RFID readers

The purpose of Data Logger is to pre-store and filter data, and possibly to write them to a log file or a database. In this system, RFID readers interact with tags and send data to Data Logger, which acts as the central server.

#USB RFID READER SOFTWARE SERIAL#

You can use Advanced Serial Data Logger and the LLRP Reader Protocol module to build a data collection server and to integrate RFID readers that support the LLRP protocol into an enterprise's existing control and tracking system. It allows you to try all features! Plugins can be downloaded separately here

Usb rfid reader software